Padding Process :

   4 Parts Ingrain Brill Blue 3G Pdr.
   8 Parts Solvent Cum Emulsifier
   10 Parts Urea
   20 Parts Water followed by addition of
   50 Parts Ice cold Water & Add
   8 Parts Copper Complex
   100 Parts

Pad and dry the material at about 80-90°C. Cure at 150°C for about 5 to 6 minutes.

After treatment: The material is rinse in cold water & is treated with Sodium nitrite 4 gms/litre & 5 gms/litre HCL at "boil for 20 minutes. Wash with Soap & Soda ash at boil and rinse.(Without Guarantee)

(2) Rung Brill Blue 3G Pdr. Printing for Fabrics

Padding Process :

   4 Parts Ingrain Brill Blue 3G Pdr.
   10 Parts Urea
   20 Parts Water
   8 Parts Copper Complex after Stirring add
   58 Parts gum thickening
   100 Parts

Print on screen and dry in air. Steam for one hour wash with cold water and dry. (Without Guarantee)

(3) Rung Brill Blue 3GM Pdr. (Mixed with Copper Complex) \ Dyeing for Fabrics

Padding Process :

   6 Parts Ingrain Brill Blue 3GM Pdr
   8 Parts Solvent cum Emulsifier
   10 Parts Urea
   25 Parts followed by addition of
   51 Parts Ice cold water
   100 Parts

Pad and dry the material at about 80-90°C. Cure at 150°C for about 5 to 6 minutes.

After treatment: The material is rinse in cold water & is treated with Sodium nitrite 4 gms/litre & 5 gms/litre HCL at boil for 20 minutes. Wash with Soap & Soda ash at boil and rinse. (Without Guarantee)

(4) Rung Blue 3GM Pdr. Printing for Fabrics

Padding Process :

   6 Parts Ingrain Brill Blue 3GM Pdr.
   10 Parts Urea
   26 Parts Water
   58 Parts Gum Thickening
   100 Parts

Print on screen and dry in air. Steam for one hour wash with cold wat^r and dry.

(5) Rung Blue 5 Application Printing

Application Printing: Cellulose and silk. Dissolve in an organic acid and thickaning and a spl. auxiliary agent having reducing properties. Print, dry develop with neutral or acid steam or by backing treat in a hot acid bath. Rinse and Soap.

Can be printed alongside azoic, reactive and vat dye and pigment and on grounds of azoic coupling components.

(6) Rung Brill Blue 3GK Pdr. for Yarn Dyeing

MORDANTING (For 5 gm. Yarn)

The Yarn is soaped with Soda Ash for 10-15 minutes at boil then rinse will.

   200 mgm.        Mordant B.
   150 CC.          Water at 70°C. Yarn is entered in Mordanting bath After 10 minutes add.    1.5 gm.          Glauber Salt keep the yarn for 20 minutes in this bath then after
                       squeezing take it to the dye bath.

DYE BATH (BEAKER SHOULD BE ABSOLUTELY DRY)

        200 mgm.        Ingrain Brill. Blue 3GK.
        400 mgm.        Diethylene Glycol.
        1 gm.             Acetic Acid Glacial after keeping the above for 20 minutes in cold
                            bath it is to be poured into
        150 cc.          Ice Cold Water enter the Mordanted yarn into this 'dye bath and
                            keep it for 25 minutes. The dyed yarn is taken out and developed in.
        500 mgm.        Caustic Soda add.
        300 mgm.        Sodium Hydrosulphite
        100 cc.          Water at 60°C for 10 minutes the yarn is stirred and then treated
                            with.
        1 cc.             HCL
        500 mgm.       Sodium Nitrite
        100 cc.          Water at 60°C the yarn is kept for treatment for 10 minutes.

The yarn rinsed in cold water and washed with soap and soda ash at boil. (Without Guarantee)